Why do i see many drivers? Below is a list of drivers that may be suitable for your device. With the different devices, they can have the same driver, it's because they all use the same chip manufacturer. How to select driver? If you are looking for an update, pickup the latest one. If your driver isn't working, use the driver having the same OEM with the your laptop/desktop brand name.
Click start control panel administration tools computer management device manager scroll through all of your devices or for windows 7 click start right click on computer select properties in the left pane device manager scroll through all of your devices if you see a yellow question or exclamation mark?! The blend door is stuck or not receiving the control knob information to change the temperature. Your car uses an electronic blend door actuator.
Usb Controller Driver Windows 7 64-bit
You will need to locate this devise under the dash. You may have to remove the dash to get to it. You will want to make sure that there is power coming in to the new switch and going out to the Blend Door Actuator. If you do not have power to the switch then find out why and fix the broken wire, if you have power to the motor but it won't move then replace the Blend Door Actuator (BDA). Make sure the black wire to the BDA is grounded. The do the following: Test the orange wire going to the BDA and the Yellow wire from the BDA to the switch for postive power.
Network Controller Driver Windows 7 64-bit
This will tell you if the BDA is getting power in from the car and out to the switch. Then make sure you get a power reading from the Red with White strip and the Red with Lite Green strip, this will tell you that the switch is sending the power back to the BDA to control the temp. If power is coming in to the BDA and not going out to the switch then the BDA is bad. If power is going to and from the switch back to the BDA then that also says the BDA is bad. If the ground is broken that will cause the BDA not to respond. Jun 21, 2008.